ArcelorMittal

NEW: Sheet Piling app available for iPad and Android devices

App Store Google Play
Decoration

News

2008-06-11

GbEnglish version - Replacement of the existing old retaining wall in Kleinmachnow
Replacement of the existing old retaining wall in Kleinmachnow

The stability of the old cantilever sheet pile wall of the access basin to the Kleinmachnow lock was at risk. A land side caused by the measured movement of the structure would engender major obstructions of the lock’s northern chamber. The existing old retaining wall was therefore replaced by an 111-m long sheet pile wall consisting of 15.5 to 16.5-m AZ 28 piles in steel grade S 355 GP. The Z-piles were installed with a hydraulic press to avoid noise and vibrations.
 

 

 
 
   



 

Owner & Designer:     Wasserstrassenneubauamt Berlin
Main contractor:     Firma Bunte (Marine construction department) - Oranienburg
Sheet piles:     291 metric tons AZ 28 in steel grade: S 355 GP


 

 
FrFrench version - Réhabilitation du soutènement de berges dans l'avant-port de l'écluse de Kleinmachnow
Replacement of the existing old retaining wall in Kleinmachnow

La stabilité de l'ancien rideau de palplanche autostable de l'avant-port de l'écluse de Kleinmachnow n'était plus d'un niveau de sécurité suffisant. Suite à la constatation du  déplacement de la structure, un effondrement de la berge était à craindre ayant pour conséquence le blocage du bassin nord de l'écluse.

Les 111 mètres de rideau ont donc été remplacés par un nouveau linéaire en profil AZ 28 de nuance S355 GP et de longueur 16,5 et 15,5 m. Le chantier étant situé en zone sensible, la technique du vérinage a été choisie pour le mise en œuvre des palplanches.

 

 
 

Côté eau, l'ancien rideau de palplanche autostable, qui sera arraché après l'achèvement de la nouvelle structure.
Nouveau rideau de soutènement ancré; en arrière plan la stabilité du talus est assurée par des pieux utilisant la technique du cloutage.

 


 



Coupe transversale de la berge

 

 
 

Maître d'ouvrage et BE:   Wasserstrassenneubauamt Berlin 
Entreprise de construction:   Firma Bunte (Marine construction department) - Oranienburg
Palplanches:   291 tonnes AZ 28 S 355 GP de longueurs 16,5 et 15,5 m

 

 

 

 
 
DeGerman version - Ersatz der nördlichen Ufereinfassung im unteren Vorhafen der Schleusenanlage
Kleinmachnow
Replacement of the existing old retaining wall in Kleinmachnow
Die alte, unverankerte Stahlspundwand im unteren Vorhafen der Schleusenanlage Kleinmachnow war nicht mehr standsicher.
Aufgrund festgestellter Bauwerksbewegungen war eine Hangrutschung nicht mehr auszuschließen, die zu einer Vollsperrung der Nordkammer der Schleuse Kleinmachnow geführt hätte. Daher wurde die vorhandene alte Ufereinfassung auf 111m Länge in Spundwandbauweise mit Profil AZ 28 in Stahlsorte S 355 GP und Längen von 16,5/15,5 m ersetzt.
Da wegen der exponierten Lage als Einbauverfahren das Einpressen erforderlich war, sind hier Z- Profile zum Einsatz gekommen.
 
 
 
 
KLM - Wasserseitig die alte Ufereinfassung, die nach Fertigstellung der neuen Wand entfernt wird KLM - Mit Verpressankern verankerte Spundwand, hintenliegende Trägerverbauwand
 


 

Querschnitt der Ufereinfassung
 

Bauherr und Planer:     Wasserstrassenneubauamt Berlin
Bauausführung:     Firma Bunte (Marine construction department) - Oranienburg
Spundwände:     291 metric tons AZ 28 in steel grade: S 355 GP

 
 
ItItalian version - Sostituzione di un vecchia parete di contenimento in Kleinmachnow
Replacement of the existing old retaining wall in Kleinmachnow
Nel bacino d’accesso alla chiusa di Kleinmachnow si era verificato che la parete di sponda, realizzata mediante palancole metalliche non tirantate, era a rischio. Avendo appurato un cedimento della struttura, si temeva un crollo che avrebbe, di fatto, bloccato l’accesso al bacino nord della chiusa.

Si è, quindi, deciso di procedere alla sostituzione dei 111 metri lineari di parete con palancole AZ28 in lunghezze variabili tra i 15,5 m ed i 16,5 m, in qualità S 355 GP. Le palancole, con sezione Z, sono state infisse mediante una pressa idraulica che ha consentito di evitare rumore e vibrazioni.

 

 
 

Lato acqua, vecchia parete in palancole non tirantate che verrà rimossa dopo l’installazione della nuova.
Nuova parete di contenimento ancorata; la stabilità del pendio retrostante è garantita da pali.

 


 



Sezione trasversale della paratia.

 

 
 

Direttore dei lavori e Progettista:   Wasserstrassenneubauamt Berlin 
Impresa di construzioni:   Firma Bunte (Marine construction department) - Oranienburg
Palancole:   291 tonnellate AZ 28 in qualità S 355 GP

 

 

 

 

 

 
 
Back